|
|
CAPACITY LIST
TURNING
1 off Yamazaki Mazak QuickTurn Nexus 200M, Horizontal
CNC Lathe,
3 Axis turning and milling, Mazatrol Fusion 640T Control, 65mm
Maximum Bar Diameter, 380mm Maximum Cutting Diameter, 675mm
Maximum Swing, 230mm X Axis Travel, 575mm Z Axis Travel,
360,000 increments on C Axis @ 0.001 degrees, Programmable
Tailstock, 8” Chuck, 4 Vertical and 1 Horizontal driven Tools
for
milling, 12 tool turret
1 off Yamazaki Mazak QuickTurn Smart 200, Horizontal
CNC Lathe
2 Axis turning only, Mazatrol Smart Control, 65mm Maximum
Bar Dia, 350mm Maximum Cutting Diameter, 660mm Maximum
Swing, 195mm X Axis Travel, 560mm Z Axis travel, Programmable
Tailstock, 8” Chuck, 12 tool turret
1 off Harrison Alpha 400 CNC Centre Lathe, Semi-Automatic
CNC Control with Full Off-Line Programming via P.C.
(Conversational with Graphics, Manual Tool Changing).
23” Swing-In Gap Bed, 15.3/4” Swing-Over Bed.
50” between Centres, 2.1/8” Maximum Bar Diameter.
10 H.P. Motor. No. 5 Morse Taper, G.E. Fanuc Control.
1 off Colchester Triumph 2500 Centre Lathe.
23” Swing-in Gap Bed, 15.3/4” Swing-Over Bed.
50” between Centres, 2.1/8” Maximum Bar Diameter.
10 H.P Motor. Variable Spindle Speed to 2500 RPM.
Ainjest quick threading attachment for metric pitches.
Newall DP8 Digital Readout with constant surface speed.
1 off Colchester Triumph 2000 Centre Lathe.
22.1/2” Swing-in Gap Bed, 15.1/4” Swing-Over Bed.
50” between Centre, 2.1/8” Maximum Bar Diameter.
7.5.H.P Motor. No 4 Morse Taper.
Newell “Sapphire” 2-axis Digital Readout.
Ainjest Quick-Treading Attachment for Metric/Imperial Pitches.
MILLING
2 off Bridgeport Vertical Turret Milling Machine
“ 2J2” Variable Speed Head, Table Size 42” x 9”
26.1/2” Longitudinal Traverse x 12” Cross Traverse
x 16” Vertical Traverse.
Newell “Topaz” 3-axis Digital readout.
1 off XYZ Vertical Turret Milling Machine KR-V2000
with Variable Speed Head.
Table Size 42” x 9”
26.1/2” Longitudinal Traverse x 12” Cross Traverse x 16”
Vertical
Traverse.
Newall “C80” 3-axis Digital readout.
GRINDING
1 off Jones & Shipman 1400 Surface Grinder 8”
x 24”
WELDING/FABRICATION
1 off Marshall “Dynabolt” MD300P, TIG Welding
Set, Aluminium, Stainless Steel & Alloy Steel Capability.
1 off Murex 160 MIG Welding Set, Light Steel & Sheet Steel Fabrications
with Spot-Welding Facility.
Capacity for Light Fabrications supported by Oxy/Acetylene Cutting &
Welding plant & Grinding/Linnishing Equipment.
Access to Power Bending & Guillotine Equipment.
FITTING/ASSEMBLY
Comprehensive Assembly Facilities supported by a host
of small tools and equipment, Bench & Pillar Drills, Treadle Guillotine,
Manual Rollers, Fly Press & Broaching Presses, 250 kg Pelloby Hoist
1 off Pelloby Jib Crane, 250 kg SWL, Power Hoist
1 off Atlas Copco GX5 Single Stage Screw Air Compressor
MATERIAL STOCK
A comprehensive stock of materials are carried, including
Free Machining Steel Bar, Bright Mild Steel Flat, Alloy and High Tensile
Steels, Brass, Aluminium, Stainless Steels, Polymers.
(Provides the facility for a fast response to urgent orders).
1 off Cutmaster Bulldog 200 Power Hacksaw
200mm round/square capacity
1 off Meddings 260 Pull down Saw, Circular Blade
COLLECTION/DELIVERY
A full collection and delivery service to compliment
the above facilities, by Company Vehicle and Driver.
|
